CM-M6 Maintenance and correction method of spectrophotometer

Release：999 instrument maintenance network time：2019-10-29

Cm-m6 spectrophotometer is a portable multi angle spectrophotometer produced by Japan. In the process of long-term use, the user will inevitably cause the instrument failure, which needs to be repaired and corrected. This article will bring you cm-m6 spectrophotometer repair and correction method, friends may wish to have a look at it!

Common faults analysis of cm-m6 spectrophotometer:
1. Turn on the power switch of the instrument, and the screen is not on.
Possible causes: screen damage, circuit board damage, low battery power, etc.
2. The battery cannot be charged or can only be used for charging.
Possible causes: the battery is damaged and the battery is in poor contact with the circuit.
3. Circuit board aging
Possible causes: too long use time or environmental impact
4. The protective cover or button is lost and falls off.
Causes: the use time is too long or the operator does not often go to maintenance and so on.
Maintenance and calibration method of cm-m6 spectrophotometer:
If the user has the above faults in the process of using cm-m6 spectrophotometer, he can contact oldmeters.com in time. With the strong ability of supply chain integration and industrial resources accumulated in the optical industry, we can provide professional, reliable and convenient instrument maintenance and replacement services for the majority of users.
At present, oldmeters.com supports multi brand instrument maintenance of 3nh, Tilo, Ashley and Japan. Users only need to log in the official website of oldmeters.com by computer, and can place orders by themselves according to the model and fault.
Precautions for cm-m6 spectrophotometer:
1. When the battery power is less than 30%, it is better to change the battery or charge it. The color difference meter now uses large capacity lithium battery, which can be recycled, not only environmental protection but also resource saving. When the battery is less than 30%, it's better to charge it in time. But remember to turn off the machine when charging, so as to not only prolong the battery life, but also maintain the machine itself.
2. Do not immediately test and place the product for 3-4 hours after the completion of production. When the product temperature reaches a constant value, use a colorimeter to test the color difference. For 3-4 hours, the general product temperature will drop to a constant temperature similar to the room temperature, but it is not ruled out that some special products have slow heat dissipation or are not easy to cool down, so it is necessary to determine a time length according to the actual situation to make the product temperature constant, and then use a color difference meter to test.
3. The components with complex modeling use the average measurement mode, and the accuracy of the collected data is higher. Because the surface of parts with complex modeling is generally not very smooth, and the color difference meter generally has the function of multi-point measurement and average value, which is more reliable in the application of parts with complex modeling.
4. Fix the measuring personnel, and standardize the measuring position and direction. The pressure trigger switch of colorimeter is used by different people, and the trigger pressure is different, which also has certain influence on the data. This factor will not lead to the judgment of the result.
5. If there is any problem with the accuracy of the color difference meter, it shall be returned to the factory for maintenance. It is recommended to conduct manual black-and-white plate correction at least once a week, or conduct black-and-white plate correction in case of inaccurate measurement data of colorimeter. The color difference instrument will produce measurement error after a period of use.
The above is the full text of "cm-m6 spectrophotometer maintenance and correction method" collected and sorted out by the editor. If you want to know more about the users of color difference meter maintenance service, you can pay attention to our subsequent updates!