Maintenance and calibration of cm-3600a desktop spectrophoto
Cm-3600a spectrophotometer is a desktop spectrophotometer, which can measure SCI and SCE at the same time, and support the measurement of fluorescent color. It is widely used in the R & D and quality management departments of various industries. The following will bring you cm-3600a spectrophotometer common fault analysis and maintenance correction methods.
Common faults of cm-3600a spectrophotometer:
1. The screen is not on
2. Battery damage
3. Main board is damaged
4. The light source is damaged
5. Key failure
6. Shell cracking / damage
7. System failure
8. Unable to correct
Maintenance and calibration method of cm-3600a spectrophotometer:
In the long-term use of the cm-3600a spectrophotometer, the above failures will inevitably occur. If you want to maintain, test, debug and provide technical services for the cm-3600a spectrophotometer, you can contact the maintenance center on the official website or log on the 999 instrument maintenance website.
oldmeters.com is jointly built by Shenzhen sanenchi Technology Co., Ltd. and Shenzhen sanenshi Technology Co., Ltd. and is committed to providing professional, reliable and convenient instrument maintenance and replacement services for users. Professional instrument maintenance and replacement of the Internet platform. According to the maintenance process of the platform, users can experience the convenient color difference meter maintenance service.
Main features of cm-3600a spectrophotometer:
1. Cm3600a desktop spectrophotometer can measure SCI and SCE at the same time
The SCI and SCE can be measured at the same time by a special digital gloss control mode, which can be measured continuously in only 4 seconds. Unlike traditional models, there is no need for frequent mechanical switching between Sci and SCE modes, which improves work efficiency. Since the measurement area does not change when switching modes, stable measurement data can be provided.
2. Fluorescent color measurement
The light source containing UV and the light source screening UV emit light in turn. The sample data under the light source containing UV and the sample data under the light source excluding UV (400nm or 420nm UV cut-off filter) can be obtained.
Data under any light source (UV adjustment) can also be easily obtained. Under any light source, only the standard fluorescence samples with known spectral reflectance data are needed to complete UV correction. After UV correction, the sample data under the corresponding light source can be obtained. Because there is no need to adjust the UV error caused by the movement of UV cut-off filter, the measurement time is greatly reduced.
3. Emission color and projection color can be measured in one instrument
It can be used to measure the reflectivity of opaque samples, the transmissivity of transparent liquid or solid, the diffusivity of plastic translucent objects and other samples.
Reflection measurement
Di: 8 °, de: 8 ° (diffuse lighting, 8 ° receiving) according to JIS, ISO, DIN, CIE and ASTM
Transmission color measurement
Di: 0 °, de: 0 ° (diffuse lighting, 0 ° receiving) according to ISO, DIN, CIE and ASTM
4. Compatibility with cm-3600d data
The lighting / receiving system has the same data compatibility as the traditional model cm-3600d, so the original cm-3600d users can continue to use the existing database.
5. Accurate and reliable desktop instrument under computer control
It can be operated through windows system software.
Measuring caliber: Φ 25.4mm, Φ 8mm, Φ 4mm
The above is the full text of "cm-3600a desktop spectrophotometer maintenance and correction" collected and collated by the editor. Users who want to learn more about the maintenance information of spectrophotometer can pay attention to our subsequent updates!
