Common faults of CM-700d Colorimeter
Cm-700d colorimeter is a spectrophotometer developed by Japan. Users may encounter various problems in the process of using it. Below for you to bring cm-700d colorimeter common faults and solutions, interested friends may wish to have a look!
How about cm-700d color difference meter?
Cm-700d colorimeter is a compact, light and portable spectrophotometer with wireless Bluetooth communication function and color LCD display, providing you with better convenience and operability! Using the traditional and exquisite optical design and signal processing technology of Japan, inheriting the function and characteristics of the original instrument, and making a breakthrough in the shape and structure, making the instrument more compact and light, and accurate color measurement can be carried out in various occasions. In addition, the use of color LCD can make it easier for you to read the measurement results and judge the color more intuitively.
Is the cm-700d colorimeter equipped with software?
Hello, Japan's cm700d colorimeter can be equipped with optional software to automatically report.
Cm-700d correction fault description:
When Japan cm-700d turns on the power, the screen of < correction > does not show "white correction", but "user correction". How to turn off user correction?
Press the [menu] button when cm-700d is the < correction > screen to display the < user correction > screen. If it is on, "user correction" is displayed on the < correction > screen.
Please select off and press the [save / select] button.
"White correction" will be displayed on the screen of "correction".
How can tolerance value not be set?
The tolerance value can be set to the standard color No. 01-08, but only the tolerance value of No. 01 is set at the factory.
The tolerance value of index is not set.
No. 02-08 need to generate tolerance value.
Before generation, set to display the Yi value in the observation condition.
When setting the Yi value in No. 01, please delete the tolerance value first, set it to display the Yi value in the observation condition, and then regenerate the tolerance value.
Er05 "flash error during correction
This is an error when xenon lamp flashes abnormally. There may be the following reasons, which need to be repaired.
1. The xenon lamp filament is broken
2. Failure of flash circuit
3. Sensor is abnormal
If the user has any of the above faults when using the colorimeter, he can contact oldmeters.com in time.
Tel: 400-666-2522
Mailing address:：F/6,Block 5B,Skyworth Inno Valley,Tangtou 1st Road,Shiyan,Baoan District,Shenzhen,P.R.China.
