colorimeter “Illumination Error”Troubleshooting
When CR10 colorimeter turns on the power for measurement, what is the "illumination error" displayed? How to deal with the "illumination error" fault of colorimeter? Here are the solutions for you. Interested friends may wish to have a look!
What's wrong with the colorimeter "illumination error"?
"Illumination error" refers to the illumination condition error. In fact, it is the same meaning as the failure of light source calibration. For users who use imported colorimeter, they often encounter the illumination error.
Generally speaking, if the display light source fails, it may be filament disconnection or measurement circuit failure. If the updated battery still shows the error, it needs to be repaired in time.
Solution to "illumination error" of colorimeter:
In the process of using the colorimeter, it is inevitable to encounter the problem of power aging or bulb damage. If the battery is aging, the user can replace it with a new one, and No. 5 battery can be bought in the supermarket shop; and the special battery can be consulted with our company. How to deal with the damage of the light bulb of the vulnerable parts? Can users repair themselves? To be honest, it's hard; even if you have an electrician who can disassemble the instrument, the corresponding calibration work can't be carried out by non professionals.
In order to ensure that you can continue to use the colorimeter in the future, you need to use the original imported accessories. Our company is a domestic agent authorized by the imported colorimeter brand. We can provide the colorimeter bulb and other original accessories for the majority of users, and have professional technicians to provide you with colorimeter maintenance services to help you solve various problems of the imported colorimeter.
Description of common faults of colorimeter:
1. Main vulnerable parts: lighting bulb
The bulb inside the colorimeter is easy to be damaged or aged, which makes the instrument unable to work normally or measure accurately. Therefore, it is necessary to calibrate the instrument regularly.
2. Circuit board aging
Cause: long use time or environmental impact
3. The protective cover or button is lost and falls off.
Causes: the use time is too long or the operator does not often go to maintenance and so on.
4. The possible problem is that the conventional system is wrong, and the adjustment instrument such as bulb or circuit board can be replaced.
For more problems that may occur, the specific maintenance report can only be obtained through the testing instrument.
